In order to run FiveLinux on Ubuntu, you need to install these packages:
sudo apt-get install libgtk2.0-dev
sudo apt-get install gcc
sudo apt-get install libncurses5-dev
sudo apt-get install libgpmg1-dev
sudo apt-get install libgnomeprintui2.2-dev
sudo apt-get install glade
sudo apt-get install libglade2-dev
sudo apt-get install unixODBC-dev
For MySQL:
sudo apt-get install libmysqlclient-dev
Antonio
Esto tambem funciona com KDE
Fico no aguardo
Jackson,
Yes, if you install GTK+ package on it.
FiveLinux uses GTK+, not QT.
Ola amigo
isso quer dizer que só funciona no GNOME mais não funciona no KDE
es esto mesmo ?
Fico no aguardo
FiveLinux uses GTK+ GUI.
If you install GTK+ on a KDE Linux, then FiveLinux will work fine there too 
Ola amigo Antonio
Instalei o HARBOUR 2.0 "uma maravilha da natureza" e tambem o FIVELINUX mais não estou conseguindo compilar pode me ajudar
Utilizo:
DEBIAN 5.0
KDE 4.0
Ao temtar compilar um exemplo do FIVELINUX tenho o seguinte erro
compiling...
Harbour 2.0.0 (Rev. 13372)
Copyright (c) 1999-2010, http://www.harbour-project.org/
Compiling 'testbrow.prg'...
Lines 1033, Functions/Procedures 1
Generating C source output to 'testbrow.c'... Done.
compiling C module...
testbrow.c: In function ‘HB_FUN_MAIN’:
testbrow.c:48: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘attribute’ before ‘pcode’
testbrow.c:48: error: ‘pcode’ undeclared (first use in this function)
testbrow.c:48: error: (Each undeclared identifier is reported only once
testbrow.c:48: error: for each function it appears in.)
testbrow.c:48: error: expected expression before ‘]’ token
linking...
Package libgnomeprintui-2.2 was not found in the pkg-config search path.
Perhaps you should add the directory containing libgnomeprintui-2.2.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libgnomeprintui-2.2' found
gcc: testbrow.o: Arquivo ou diretório não encontrado
rm: imposÃvel removertestbrow.o': Arquivo ou diretório não encontrado
done!
./build.sh: line 23: ./testbrow: Arquivo ou diretório não encontrado
debian:/home/jackson/fivelinux/samples#
Jackson,
Esas funciones pertenecen al módulo src/rtl/cdpapi.c que deberÃa estar contenido en la librerÃa hbrtl.
Puedes mostrar como estas construyendo el ejecutable ? Has modificado build.sh de FiveLinux ?
# ./build.sh
clear
if [ $# = 0 ]; then
echo syntax: ./build.sh file [options...]
exit
fi
echo compiling...
./../../harbour/bin/harbour $1 -n -I./../include -I./../../harbour/include $2
echo compiling C module...
gcc $1.c -c -I./../include -I./../../harbour/include `pkg-config --cflags gtk+-2.0`
echo linking...
gcc $1.o -o$1 -L./../lib -L./../../harbour/lib `pkg-config --libs gtk+-2.0` `pkg-config --libs libglade-2.0` `pkg-config --libs libgnomeprintui-2.2` -Wl,--start-group -lfive -lfivec -lcommon -lvm -lrtl -lrdd -lmacro -llang -lcodepage -lpp -ldbfntx -ldbfcdx -ldbffpt -lhbsix -lusrrdd -lct -lgtstd -ldebug -lm -lgpm -lncurses -Wl,--end-group
rm $1.c
rm $1.o
echo done!
./$1
Jackson,
If you are using Harbour 2.0 then most of those libraries names have to be changed. Harbour now uses hb... as the prefix name for the libraries names. Maybe you are using old Harbour libraries.
# ./build.sh
clear
if [ $# = 0 ]; then
echo syntax: ./build.sh file [options...]
exit
fi
echo compiling...
./../../harbour/bin/harbour $1 -n -I./../include -I./../../harbour/include $2
echo compiling C module...
gcc $1.c -c -I./../include -I./../../harbour/include `pkg-config --cflags gtk+-2.0`
echo linking...
gcc $1.o -o$1 -L./../lib -L./../../harbour/lib `pkg-config --libs gtk+-2.0` `pkg-config --libs libglade-2.0` `pkg-config --libs libgnomeprintui-2.2` -Wl,--start-group -lfive -lfivec -lhbcommon -lhbvm -lhbrtl -lhbrdd -lhbmacro -lhblang -lhbcpage -lhbpp -lrddntx -lrddcdx -lrddfpt -lhbsix -lhbusrrdd -lhbct -lgtstd -lhbdebug -lm -lgpm -lncurses -Wl,--end-group
rm $1.c
rm $1.o
echo done!
./$1
Executando ferramenta: FiveLinux
TERM environment variable not set.
compiling...
Harbour 2.0.0 (Rev. 13372)
Copyright (c) 1999-2010, http://www.harbour-project.org/
Compiling 'testbrow.prg'...
100
100
200
300
400
500
600
100
200
300
Lines 1110, Functions/Procedures 1
Generating C source output to 'testbrow.c'... Done.
compiling C module...
linking...
./../lib/libfive.a(button.o): In function `hb_vm_SymbolInit_BUTTON':
button.c:(.text+0x2e): undefined reference to `hb_vmProcessSymbolsEx'
./../lib/libfive.a(control.o): In function `hb_vm_SymbolInit_CONTROL':
control.c:(.text+0x2e): undefined reference to `hb_vmProcessSymbolsEx'
./../lib/libfive.a(errsys.o): In function `hb_vm_SymbolInit_ERRSYS':
errsys.c:(.text+0x2e): undefined reference to `hb_vmProcessSymbolsEx'
./../lib/libfive.a(harbour.o): In function `hb_vm_SymbolInit_HARBOUR':
harbour.c:(.text+0x2e): undefined reference to `hb_vmProcessSymbolsEx'
./../lib/libfive.a(harbour.o):(.data+0x18): undefined reference to `HB_FUN_HB_DBG_VMSTKLCOUNT'
done!
./../lib/libfive.a(harbour.o):(.data+0x48): undefined reference to `HB_FUN_HB_DBG_VMPARLLIST'
./../lib/libfive.a(harbour.o):(.data+0xd8): undefined reference to `HB_FUN_HB_DBG_VMVARLGET'
./../lib/libfive.a(harbour.o):(.data+0xf8): undefined reference to `HB_FUN_HB_DBG_VMVARSLEN'
./../lib/libfive.a(listbox.o): In function `hb_vm_SymbolInit_LISTBOX':
listbox.c:(.text+0x2e): undefined reference to `hb_vmProcessSymbolsEx'
./../lib/libfive.a(say.o): In function `hb_vm_SymbolInit_SAY':
say.c:(.text+0x2e): undefined reference to `hb_vmProcessSymbolsEx'
./../lib/libfive.a(valblank.o): In function `hb_vm_SymbolInit_VALBLANK':
valblank.c:(.text+0x2e): undefined reference to `hb_vmProcessSymbolsEx'
./../lib/libfive.a(wbrowse.o): In function `hb_vm_SymbolInit_WBROWSE':
wbrowse.c:(.text+0x2e): undefined reference to `hb_vmProcessSymbolsEx'
./../lib/libfive.a(wbcolumn.o): In function `hb_vm_SymbolInit_WBCOLUMN':
wbcolumn.c:(.text+0x2e): undefined reference to `hb_vmProcessSymbolsEx'
./../lib/libfive.a(window.o):window.c:(.text+0x2e): more undefined references to `hb_vmProcessSymbolsEx' follow
./../../harbour/lib/libhbrtl.a(gtsys.o): In function `hb_gt_ForceLink_HB_GT_TRM':
gtsys.c:(.text+0x15): undefined reference to `HB_FUN_HB_GT_TRM'
collect2: ld returned 1 exit status
./build.sh: line 23: ./testbrow: Arquivo ou diretório não encontrado
Saiu: 32512
Executando ferramenta: FiveLinux
compiling...
TERM environment variable not set.
Harbour 1.0.2dev Intl. (Rev. 9676)
Copyright (c) 1999-2008, http://www.harbour-project.org/
Compiling 'fivelinux.prg'...
100
100
200
300
400
500
100
200
300
Lines 1165, Functions/Procedures 3
Generating C source output to 'fivelinux.c'... Done.
compiling C module...
linking...
./../../harbour/lib/libhbrtl.a(gtsys.o): In function `hb_gt_ForceLink_HB_GT_TRM':
gtsys.c:(.text+0x7): undefined reference to `HB_FUN_HB_GT_TRM'
collect2: ld returned 1 exit status
done!
./build.sh: line 23: ./fivelinux: Arquivo ou diretório não encontrado
Saiu: 32512
Jackson,
I send you by email FiveLinux built for Harbour 2.0 and build.sh
