topic-11698

UD previous posts

Posts: 42

Joined: Sat Sep 30, 2006 09:43 AM

Visual FiveWin from Manuel Mercado
Posted: Tue Jun 24, 2008 09:36 AM

Visual FiveWin from Manuel Mercado will it be ever released

tx

Using Nissan 350 Z with last Firmware

compiled with Super Plus

mmercado

Posts: 782

Joined: Wed Dec 19, 2007 07:50 AM

Re: Visual FiveWin from Manuel Mercado
Posted: Tue Jun 24, 2008 02:02 PM

Uwe Diemer wrote:Visual FiveWin from Manuel Mercado will it be ever released

It's more than one year with no touching VFW, here is a link to see the advance, VFW is still a 16 bits app but it'll be easy to convert it to 32 bits.

http://www.box.net/shared/x6ysuaxc8c

As you'll see, the project has advanced but the fact is that I have decided to open the source code for make it finished in a reasonable short time.

I'd like to hear the Antonio's opinion (for a possible FiveTech coordination of the project) as well as the forums partners opinion too.

Regards.

Manuel Mercado

manuelmercado at prodigy dot net dot mx

Silvio

Posts: 3107

Joined: Fri Oct 07, 2005 06:28 PM

Visual FiveWin from Manuel Mercado
Posted: Tue Jun 24, 2008 02:12 PM

Manuel not run ok
there are many think not run and I cannot save a form

Best Regards, Saludos

Falconi Silvio

Detlef Hoefner

Posts: 312

Joined: Sat Oct 08, 2005 09:12 AM

Visual FiveWin from Manuel Mercado
Posted: Tue Jun 24, 2008 02:19 PM

Manuel,

i have no more wishes to work in an IDE because i don't like 'programming with mouse-clicks'.
My experience is that you'll never have a project without additional individual coding.

Just my opinion.

But you could start a poll in this forum to see the opinion of other FW users.

Regards,
Detlef

Silvio

Posts: 3107

Joined: Fri Oct 07, 2005 06:28 PM

Visual FiveWin from Manuel Mercado
Posted: Tue Jun 24, 2008 03:02 PM

Manuel ,
you can post the source here
I can converte it into 32 bit
But there are many procedure not run ok
On init not found debug information and then I cannot save the project
we can see it as a good form designer ...

Best Regards, Saludos

Falconi Silvio

Otto

Posts: 6983

Joined: Fri Oct 07, 2005 07:07 PM

Visual FiveWin from Manuel Mercado
Posted: Tue Jun 24, 2008 03:40 PM

Dear Manuel,

your decision is great. I know how hard it is to decide to open something for the public that for many different reasons one would rather like to remain secret. After years of hard work and development you have a strange feeling when you let so many strangers profit from your efforts.

But – anyway – I am sure that your decision is right. I’m not skilled enough to be of much help in programming, but I volunteer as a tester.

I’d like to see you succeed and would be happy if lots of other FiveWinners joined in.

Sincerely,

Otto Atzwanger

xfood

Posts: 96

Joined: Tue Jun 17, 2008 09:02 PM

Visual FiveWin from Manuel Mercado
Posted: Tue Jun 24, 2008 06:08 PM

complimenti,
si può avere una versione pe FWPPC?
grazie mille anticipatamente

sei GRANDE

quique

Posts: 408

Joined: Sun Aug 13, 2006 05:38 AM

Visual FiveWin from Manuel Mercado
Posted: Tue Jun 24, 2008 06:40 PM

in development
ftp://ftp.quiquesoft.com/qsvisual.zip

Saludos

Quique

Otto

Posts: 6983

Joined: Fri Oct 07, 2005 07:07 PM

Visual FiveWin from Manuel Mercado
Posted: Wed Jun 25, 2008 10:32 AM

Hello Manuel,
could you please help me on that:

mmercado

Posts: 782

Joined: Wed Dec 19, 2007 07:50 AM

Visual FiveWin from Manuel Mercado
Posted: Wed Jun 25, 2008 01:10 PM

Otto wrote:could you please help me on that:

Sorry Otto:

I uploaded the wrong file (a test one), here you are a Visual FiveWin setup exe file

http://www.box.net/shared/tosobbh8gg

Best regards.

Manuel Mercado

manuelmercado at prodigy dot net dot mx

xfood

Posts: 96

Joined: Tue Jun 17, 2008 09:02 PM

Visual FiveWin from Manuel Mercado
Posted: Wed Jun 25, 2008 02:33 PM

scusami ancora

si può avere una versione pe FWPPC?
grazie mille anticipatamente

sei GRANDE

Otto

Posts: 6983

Joined: Fri Oct 07, 2005 07:07 PM

Visual FiveWin from Manuel Mercado
Posted: Wed Jun 25, 2008 03:02 PM

Hello Manuel,

thank you for the link.
Now it is working.
I will create a small sample program.

I saw that the project files are stored as vfw files which seems is a vfw own format.
Can you use the designer and an editor at the same time?

Thanks again.
Regards,
Otto

mmercado

Posts: 782

Joined: Wed Dec 19, 2007 07:50 AM

Visual FiveWin from Manuel Mercado
Posted: Wed Jun 25, 2008 03:56 PM

Otto wrote:Now it is working.
I will create a small sample program.

Be my guest

I allready use vfw intensively to design my forms. I simulate the controls that aren't supported yet with other similar and later, just retouch the generated prg. It saves a lot of design time and typing to me.

Otto wrote:I saw that the project files are stored as vfw files which seems is a vfw own format.

So it is, try by double clicking a vfw file at c:\Program Files\Visual Fivewin\Projects\

Otto wrote:Can you use the designer and an editor at the same time?

Yes, but changes in the editor are not reflected in the module design, in fact prgs are not stored as a project's part, just module's form designs are stored by now.

Regards.

Manuel Mercado

manuelmercado at prodigy dot net dot mx

Otto

Posts: 6983

Joined: Fri Oct 07, 2005 07:07 PM

Visual FiveWin from Manuel Mercado
Posted: Wed Jun 25, 2008 04:33 PM

Manuel,
Thank you for your answer.
I can’t find out how to save a modul as prg file. Could you please help me.

Regards,
Otto

PS: do you want that we report the errors we detect?

mmercado

Posts: 782

Joined: Wed Dec 19, 2007 07:50 AM

Visual FiveWin from Manuel Mercado
Posted: Wed Jun 25, 2008 05:22 PM

Otto wrote:I can’t find out how to save a modul as prg file. Could you please help me.

Click Preview Code and then File, Save As, etc

Otto wrote:PS: do you want that we report the errors we detect?

Sure, it'll be appreciated.

Regards.

Manuel Mercado

manuelmercado at prodigy dot net dot mx

FiveTech Support Forums