FiveTech Support Forums

FiveWin / Harbour / xBase community
Board index FiveWin para Harbour/xHarbour FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posts: 883
Joined: Thu Dec 24, 2009 12:46 AM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Tue Jan 29, 2013 04:15 AM
Por si necesitas alguna encripción, ten esta función en PHP...
Aún teniendo el código fuente de la función, sería muy difícil desencriptar sin tener la llave de encripción... (Al menos para la mayoria de nosotros)...
Code (fw): Select all Collapse
<?php
//PHP version
//Paul Tero, July 2001
//http://www.tero.co.uk/des/
//
//Optimised for performance with large blocks by Michael Hayworth, November 2001
//http://www.netdealing.com
//
//Converted from JavaScript to PHP by Jim Gibbs, June 2004
//
//Updated to be safe in PHP on 64-bit architectures by Jirka Pech, July 2007
//http://hq.cz/
//
//THIS SOFTWARE IS PROVIDED "AS IS" AND
//ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
//FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
//DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
//OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
//HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
//LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
//OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
//SUCH DAMAGE.

//des
//this takes the key, the message, and whether to encrypt or decrypt
function des ($key, $message, $encrypt, $mode, $iv, $padding) {
  //declaring this locally speeds things up a bit
  $spfunction1 = array (0x1010400,0,0x10000,0x1010404,0x1010004,0x10404,0x4,0x10000,0x400,0x1010400,0x1010404,0x400,0x1000404,0x1010004,0x1000000,0x4,0x404,0x1000400,0x1000400,0x10400,0x10400,0x1010000,0x1010000,0x1000404,0x10004,0x1000004,0x1000004,0x10004,0,0x404,0x10404,0x1000000,0x10000,0x1010404,0x4,0x1010000,0x1010400,0x1000000,0x1000000,0x400,0x1010004,0x10000,0x10400,0x1000004,0x400,0x4,0x1000404,0x10404,0x1010404,0x10004,0x1010000,0x1000404,0x1000004,0x404,0x10404,0x1010400,0x404,0x1000400,0x1000400,0,0x10004,0x10400,0,0x1010004);
  $spfunction2 = array (-0x7fef7fe0,-0x7fff8000,0x8000,0x108020,0x100000,0x20,-0x7fefffe0,-0x7fff7fe0,-0x7fffffe0,-0x7fef7fe0,-0x7fef8000,-0x80000000,-0x7fff8000,0x100000,0x20,-0x7fefffe0,0x108000,0x100020,-0x7fff7fe0,0,-0x80000000,0x8000,0x108020,-0x7ff00000,0x100020,-0x7fffffe0,0,0x108000,0x8020,-0x7fef8000,-0x7ff00000,0x8020,0,0x108020,-0x7fefffe0,0x100000,-0x7fff7fe0,-0x7ff00000,-0x7fef8000,0x8000,-0x7ff00000,-0x7fff8000,0x20,-0x7fef7fe0,0x108020,0x20,0x8000,-0x80000000,0x8020,-0x7fef8000,0x100000,-0x7fffffe0,0x100020,-0x7fff7fe0,-0x7fffffe0,0x100020,0x108000,0,-0x7fff8000,0x8020,-0x80000000,-0x7fefffe0,-0x7fef7fe0,0x108000);
  $spfunction3 = array (0x208,0x8020200,0,0x8020008,0x8000200,0,0x20208,0x8000200,0x20008,0x8000008,0x8000008,0x20000,0x8020208,0x20008,0x8020000,0x208,0x8000000,0x8,0x8020200,0x200,0x20200,0x8020000,0x8020008,0x20208,0x8000208,0x20200,0x20000,0x8000208,0x8,0x8020208,0x200,0x8000000,0x8020200,0x8000000,0x20008,0x208,0x20000,0x8020200,0x8000200,0,0x200,0x20008,0x8020208,0x8000200,0x8000008,0x200,0,0x8020008,0x8000208,0x20000,0x8000000,0x8020208,0x8,0x20208,0x20200,0x8000008,0x8020000,0x8000208,0x208,0x8020000,0x20208,0x8,0x8020008,0x20200);
  $spfunction4 = array (0x802001,0x2081,0x2081,0x80,0x802080,0x800081,0x800001,0x2001,0,0x802000,0x802000,0x802081,0x81,0,0x800080,0x800001,0x1,0x2000,0x800000,0x802001,0x80,0x800000,0x2001,0x2080,0x800081,0x1,0x2080,0x800080,0x2000,0x802080,0x802081,0x81,0x800080,0x800001,0x802000,0x802081,0x81,0,0,0x802000,0x2080,0x800080,0x800081,0x1,0x802001,0x2081,0x2081,0x80,0x802081,0x81,0x1,0x2000,0x800001,0x2001,0x802080,0x800081,0x2001,0x2080,0x800000,0x802001,0x80,0x800000,0x2000,0x802080);
  $spfunction5 = array (0x100,0x2080100,0x2080000,0x42000100,0x80000,0x100,0x40000000,0x2080000,0x40080100,0x80000,0x2000100,0x40080100,0x42000100,0x42080000,0x80100,0x40000000,0x2000000,0x40080000,0x40080000,0,0x40000100,0x42080100,0x42080100,0x2000100,0x42080000,0x40000100,0,0x42000000,0x2080100,0x2000000,0x42000000,0x80100,0x80000,0x42000100,0x100,0x2000000,0x40000000,0x2080000,0x42000100,0x40080100,0x2000100,0x40000000,0x42080000,0x2080100,0x40080100,0x100,0x2000000,0x42080000,0x42080100,0x80100,0x42000000,0x42080100,0x2080000,0,0x40080000,0x42000000,0x80100,0x2000100,0x40000100,0x80000,0,0x40080000,0x2080100,0x40000100);
  $spfunction6 = array (0x20000010,0x20400000,0x4000,0x20404010,0x20400000,0x10,0x20404010,0x400000,0x20004000,0x404010,0x400000,0x20000010,0x400010,0x20004000,0x20000000,0x4010,0,0x400010,0x20004010,0x4000,0x404000,0x20004010,0x10,0x20400010,0x20400010,0,0x404010,0x20404000,0x4010,0x404000,0x20404000,0x20000000,0x20004000,0x10,0x20400010,0x404000,0x20404010,0x400000,0x4010,0x20000010,0x400000,0x20004000,0x20000000,0x4010,0x20000010,0x20404010,0x404000,0x20400000,0x404010,0x20404000,0,0x20400010,0x10,0x4000,0x20400000,0x404010,0x4000,0x400010,0x20004010,0,0x20404000,0x20000000,0x400010,0x20004010);
  $spfunction7 = array (0x200000,0x4200002,0x4000802,0,0x800,0x4000802,0x200802,0x4200800,0x4200802,0x200000,0,0x4000002,0x2,0x4000000,0x4200002,0x802,0x4000800,0x200802,0x200002,0x4000800,0x4000002,0x4200000,0x4200800,0x200002,0x4200000,0x800,0x802,0x4200802,0x200800,0x2,0x4000000,0x200800,0x4000000,0x200800,0x200000,0x4000802,0x4000802,0x4200002,0x4200002,0x2,0x200002,0x4000000,0x4000800,0x200000,0x4200800,0x802,0x200802,0x4200800,0x802,0x4000002,0x4200802,0x4200000,0x200800,0,0x2,0x4200802,0,0x200802,0x4200000,0x800,0x4000002,0x4000800,0x800,0x200002);
  $spfunction8 = array (0x10001040,0x1000,0x40000,0x10041040,0x10000000,0x10001040,0x40,0x10000000,0x40040,0x10040000,0x10041040,0x41000,0x10041000,0x41040,0x1000,0x40,0x10040000,0x10000040,0x10001000,0x1040,0x41000,0x40040,0x10040040,0x10041000,0x1040,0,0,0x10040040,0x10000040,0x10001000,0x41040,0x40000,0x41040,0x40000,0x10041000,0x1000,0x40,0x10040040,0x1000,0x41040,0x10001000,0x40,0x10000040,0x10040000,0x10040040,0x10000000,0x40000,0x10001040,0,0x10041040,0x40040,0x10000040,0x10040000,0x10001000,0x10001040,0,0x10041040,0x41000,0x41000,0x1040,0x1040,0x40040,0x10000000,0x10041000);
  $masks = array (4294967295,2147483647,1073741823,536870911,268435455,134217727,67108863,33554431,16777215,8388607,4194303,2097151,1048575,524287,262143,131071,65535,32767,16383,8191,4095,2047,1023,511,255,127,63,31,15,7,3,1,0);

  //create the 16 or 48 subkeys we will need
  $keys = des_createKeys ($key);
  $m=0;
  $len = strlen($message);
  $chunk = 0;
  //set up the loops for single and triple des
  $iterations = ((count($keys) == 32) ? 3 : 9); //single or triple des
  if ($iterations == 3) {$looping = (($encrypt) ? array (0, 32, 2) : array (30, -2, -2));}
  else {$looping = (($encrypt) ? array (0, 32, 2, 62, 30, -2, 64, 96, 2) : array (94, 62, -2, 32, 64, 2, 30, -2, -2));}

  //pad the message depending on the padding parameter
  if ($padding == 2) $message .= "        "; //pad the message with spaces
  else if ($padding == 1) {$temp = 8-($len%8); $message .= chr($temp) . chr($temp) . chr($temp) . chr($temp) . chr($temp) . chr($temp) . chr($temp) . chr($temp); if ($temp==8) $len+=8;} //PKCS7 padding
  else if (!$padding) $message .= (chr(0) . chr(0) . chr(0) . chr(0) . chr(0) . chr(0) . chr(0) . chr(0)); //pad the message out with null bytes

  //store the result here
  $result = "";
  $tempresult = "";

  if ($mode == 1) { //CBC mode
    $cbcleft = (ord($iv{$m++}) << 24) | (ord($iv{$m++}) << 16) | (ord($iv{$m++}) << 8) | ord($iv{$m++});
    $cbcright = (ord($iv{$m++}) << 24) | (ord($iv{$m++}) << 16) | (ord($iv{$m++}) << 8) | ord($iv{$m++});
    $m=0;
  }

  //loop through each 64 bit chunk of the message
  while ($m < $len) {
    $left = (ord($message{$m++}) << 24) | (ord($message{$m++}) << 16) | (ord($message{$m++}) << 8) | ord($message{$m++});
    $right = (ord($message{$m++}) << 24) | (ord($message{$m++}) << 16) | (ord($message{$m++}) << 8) | ord($message{$m++});

    //for Cipher Block Chaining mode, xor the message with the previous result
    if ($mode == 1) {if ($encrypt) {$left ^= $cbcleft; $right ^= $cbcright;} else {$cbcleft2 = $cbcleft; $cbcright2 = $cbcright; $cbcleft = $left; $cbcright = $right;}}

    //first each 64 but chunk of the message must be permuted according to IP
    $temp = (($left >> 4 & $masks[4]) ^ $right) & 0x0f0f0f0f; $right ^= $temp; $left ^= ($temp << 4);
    $temp = (($left >> 16 & $masks[16]) ^ $right) & 0x0000ffff; $right ^= $temp; $left ^= ($temp << 16);
    $temp = (($right >> 2 & $masks[2]) ^ $left) & 0x33333333; $left ^= $temp; $right ^= ($temp << 2);
    $temp = (($right >> 8 & $masks[8]) ^ $left) & 0x00ff00ff; $left ^= $temp; $right ^= ($temp << 8);
    $temp = (($left >> 1 & $masks[1]) ^ $right) & 0x55555555; $right ^= $temp; $left ^= ($temp << 1);

    $left = (($left << 1) | ($left >> 31 & $masks[31])); 
    $right = (($right << 1) | ($right >> 31 & $masks[31])); 

    //do this either 1 or 3 times for each chunk of the message
    for ($j=0; $j<$iterations; $j+=3) {
      $endloop = $looping[$j+1];
      $loopinc = $looping[$j+2];
      //now go through and perform the encryption or decryption  
      for ($i=$looping[$j]; $i!=$endloop; $i+=$loopinc) { //for efficiency
        $right1 = $right ^ $keys[$i]; 
        $right2 = (($right >> 4 & $masks[4]) | ($right << 28 & 0xffffffff)) ^ $keys[$i+1];
        //the result is attained by passing these bytes through the S selection functions
        $temp = $left;
        $left = $right;
        $right = $temp ^ ($spfunction2[($right1 >> 24 & $masks[24]) & 0x3f] | $spfunction4[($right1 >> 16 & $masks[16]) & 0x3f]
              | $spfunction6[($right1 >>  8 & $masks[8]) & 0x3f] | $spfunction8[$right1 & 0x3f]
              | $spfunction1[($right2 >> 24 & $masks[24]) & 0x3f] | $spfunction3[($right2 >> 16 & $masks[16]) & 0x3f]
              | $spfunction5[($right2 >>  8 & $masks[8]) & 0x3f] | $spfunction7[$right2 & 0x3f]);
      }
      $temp = $left; $left = $right; $right = $temp; //unreverse left and right
    } //for either 1 or 3 iterations

    //move then each one bit to the right
    $left = (($left >> 1 & $masks[1]) | ($left << 31)); 
    $right = (($right >> 1 & $masks[1]) | ($right << 31)); 

    //now perform IP-1, which is IP in the opposite direction
    $temp = (($left >> 1 & $masks[1]) ^ $right) & 0x55555555; $right ^= $temp; $left ^= ($temp << 1);
    $temp = (($right >> 8 & $masks[8]) ^ $left) & 0x00ff00ff; $left ^= $temp; $right ^= ($temp << 8);
    $temp = (($right >> 2 & $masks[2]) ^ $left) & 0x33333333; $left ^= $temp; $right ^= ($temp << 2);
    $temp = (($left >> 16 & $masks[16]) ^ $right) & 0x0000ffff; $right ^= $temp; $left ^= ($temp << 16);
    $temp = (($left >> 4 & $masks[4]) ^ $right) & 0x0f0f0f0f; $right ^= $temp; $left ^= ($temp << 4);

    //for Cipher Block Chaining mode, xor the message with the previous result
    if ($mode == 1) {if ($encrypt) {$cbcleft = $left; $cbcright = $right;} else {$left ^= $cbcleft2; $right ^= $cbcright2;}}
    $tempresult .= (chr($left>>24 & $masks[24]) . chr(($left>>16 & $masks[16]) & 0xff) . chr(($left>>8 & $masks[8]) & 0xff) . chr($left & 0xff) . chr($right>>24 & $masks[24]) . chr(($right>>16 & $masks[16]) & 0xff) . chr(($right>>8 & $masks[8]) & 0xff) . chr($right & 0xff));

    $chunk += 8;
    if ($chunk == 512) {$result .= $tempresult; $tempresult = ""; $chunk = 0;}
  } //for every 8 characters, or 64 bits in the message

  //return the result as an array
  return ($result . $tempresult);
} //end of des

//des_createKeys
//this takes as input a 64 bit key (even though only 56 bits are used)
//as an array of 2 integers, and returns 16 48 bit keys
function des_createKeys ($key) {
  //declaring this locally speeds things up a bit
  $pc2bytes0  = array (0,0x4,0x20000000,0x20000004,0x10000,0x10004,0x20010000,0x20010004,0x200,0x204,0x20000200,0x20000204,0x10200,0x10204,0x20010200,0x20010204);
  $pc2bytes1  = array (0,0x1,0x100000,0x100001,0x4000000,0x4000001,0x4100000,0x4100001,0x100,0x101,0x100100,0x100101,0x4000100,0x4000101,0x4100100,0x4100101);
  $pc2bytes2  = array (0,0x8,0x800,0x808,0x1000000,0x1000008,0x1000800,0x1000808,0,0x8,0x800,0x808,0x1000000,0x1000008,0x1000800,0x1000808);
  $pc2bytes3  = array (0,0x200000,0x8000000,0x8200000,0x2000,0x202000,0x8002000,0x8202000,0x20000,0x220000,0x8020000,0x8220000,0x22000,0x222000,0x8022000,0x8222000);
  $pc2bytes4  = array (0,0x40000,0x10,0x40010,0,0x40000,0x10,0x40010,0x1000,0x41000,0x1010,0x41010,0x1000,0x41000,0x1010,0x41010);
  $pc2bytes5  = array (0,0x400,0x20,0x420,0,0x400,0x20,0x420,0x2000000,0x2000400,0x2000020,0x2000420,0x2000000,0x2000400,0x2000020,0x2000420);
  $pc2bytes6  = array (0,0x10000000,0x80000,0x10080000,0x2,0x10000002,0x80002,0x10080002,0,0x10000000,0x80000,0x10080000,0x2,0x10000002,0x80002,0x10080002);
  $pc2bytes7  = array (0,0x10000,0x800,0x10800,0x20000000,0x20010000,0x20000800,0x20010800,0x20000,0x30000,0x20800,0x30800,0x20020000,0x20030000,0x20020800,0x20030800);
  $pc2bytes8  = array (0,0x40000,0,0x40000,0x2,0x40002,0x2,0x40002,0x2000000,0x2040000,0x2000000,0x2040000,0x2000002,0x2040002,0x2000002,0x2040002);
  $pc2bytes9  = array (0,0x10000000,0x8,0x10000008,0,0x10000000,0x8,0x10000008,0x400,0x10000400,0x408,0x10000408,0x400,0x10000400,0x408,0x10000408);
  $pc2bytes10 = array (0,0x20,0,0x20,0x100000,0x100020,0x100000,0x100020,0x2000,0x2020,0x2000,0x2020,0x102000,0x102020,0x102000,0x102020);
  $pc2bytes11 = array (0,0x1000000,0x200,0x1000200,0x200000,0x1200000,0x200200,0x1200200,0x4000000,0x5000000,0x4000200,0x5000200,0x4200000,0x5200000,0x4200200,0x5200200);
  $pc2bytes12 = array (0,0x1000,0x8000000,0x8001000,0x80000,0x81000,0x8080000,0x8081000,0x10,0x1010,0x8000010,0x8001010,0x80010,0x81010,0x8080010,0x8081010);
  $pc2bytes13 = array (0,0x4,0x100,0x104,0,0x4,0x100,0x104,0x1,0x5,0x101,0x105,0x1,0x5,0x101,0x105);
  $masks = array (4294967295,2147483647,1073741823,536870911,268435455,134217727,67108863,33554431,16777215,8388607,4194303,2097151,1048575,524287,262143,131071,65535,32767,16383,8191,4095,2047,1023,511,255,127,63,31,15,7,3,1,0);

  //how many iterations (1 for des, 3 for triple des)
  $iterations = ((strlen($key) > 8) ? 3 : 1); //changed by Paul 16/6/2007 to use Triple DES for 9+ byte keys
  //stores the return keys
  $keys = array (); // size = 32 * iterations but you don't specify this in php
  //now define the left shifts which need to be done
  $shifts = array (0, 0, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 0);
  //other variables
  $m=0;
  $n=0;

  for ($j=0; $j<$iterations; $j++) { //either 1 or 3 iterations
    $left = (ord($key{$m++}) << 24) | (ord($key{$m++}) << 16) | (ord($key{$m++}) << 8) | ord($key{$m++});
    $right = (ord($key{$m++}) << 24) | (ord($key{$m++}) << 16) | (ord($key{$m++}) << 8) | ord($key{$m++});

    $temp = (($left >> 4 & $masks[4]) ^ $right) & 0x0f0f0f0f; $right ^= $temp; $left ^= ($temp << 4);
    $temp = (($right >> 16 & $masks[16]) ^ $left) & 0x0000ffff; $left ^= $temp; $right ^= ($temp << 16);
    $temp = (($left >> 2 & $masks[2]) ^ $right) & 0x33333333; $right ^= $temp; $left ^= ($temp << 2);
    $temp = (($right >> 16 & $masks[16]) ^ $left) & 0x0000ffff; $left ^= $temp; $right ^= ($temp << 16);
    $temp = (($left >> 1 & $masks[1]) ^ $right) & 0x55555555; $right ^= $temp; $left ^= ($temp << 1);
    $temp = (($right >> 8 & $masks[8]) ^ $left) & 0x00ff00ff; $left ^= $temp; $right ^= ($temp << 8);
    $temp = (($left >> 1 & $masks[1]) ^ $right) & 0x55555555; $right ^= $temp; $left ^= ($temp << 1);

    //the right side needs to be shifted and to get the last four bits of the left side
    $temp = ($left << 8) | (($right >> 20 & $masks[20]) & 0x000000f0);
    //left needs to be put upside down
    $left = ($right << 24) | (($right << 8) & 0xff0000) | (($right >> 8 & $masks[8]) & 0xff00) | (($right >> 24 & $masks[24]) & 0xf0);
    $right = $temp;

    //now go through and perform these shifts on the left and right keys
    for ($i=0; $i < count($shifts); $i++) {
      //shift the keys either one or two bits to the left
      if ($shifts[$i] > 0) {
         $left = (($left << 2) | ($left >> 26 & $masks[26]));
         $right = (($right << 2) | ($right >> 26 & $masks[26]));
      } else {
         $left = (($left << 1) | ($left >> 27 & $masks[27]));
         $right = (($right << 1) | ($right >> 27 & $masks[27]));
      }
      $left = $left & -0xf;
      $right = $right & -0xf;

      //now apply PC-2, in such a way that E is easier when encrypting or decrypting
      //this conversion will look like PC-2 except only the last 6 bits of each byte are used
      //rather than 48 consecutive bits and the order of lines will be according to 
      //how the S selection functions will be applied: S2, S4, S6, S8, S1, S3, S5, S7
      $lefttemp = $pc2bytes0[$left >> 28 & $masks[28]] | $pc2bytes1[($left >> 24 & $masks[24]) & 0xf]
              | $pc2bytes2[($left >> 20 & $masks[20]) & 0xf] | $pc2bytes3[($left >> 16 & $masks[16]) & 0xf]
              | $pc2bytes4[($left >> 12 & $masks[12]) & 0xf] | $pc2bytes5[($left >> 8 & $masks[8]) & 0xf]
              | $pc2bytes6[($left >> 4 & $masks[4]) & 0xf];
      $righttemp = $pc2bytes7[$right >> 28 & $masks[28]] | $pc2bytes8[($right >> 24 & $masks[24]) & 0xf]
                | $pc2bytes9[($right >> 20 & $masks[20]) & 0xf] | $pc2bytes10[($right >> 16 & $masks[16]) & 0xf]
                | $pc2bytes11[($right >> 12 & $masks[12]) & 0xf] | $pc2bytes12[($right >> 8 & $masks[8]) & 0xf]
                | $pc2bytes13[($right >> 4 & $masks[4]) & 0xf];
      $temp = (($righttemp >> 16 & $masks[16]) ^ $lefttemp) & 0x0000ffff; 
      $keys[$n++] = $lefttemp ^ $temp; $keys[$n++] = $righttemp ^ ($temp << 16);
    }
  } //for each iterations
  //return the keys we've created
  return $keys;
} //end of des_createKeys

////////////////////////////// TEST //////////////////////////////
function stringToHex ($s) {
  $r = "0x";
  $hexes = array ("0","1","2","3","4","5","6","7","8","9","a","b","c","d","e","f");
  for ($i=0; $i<strlen($s); $i++) {$r .= ($hexes [(ord($s{$i}) >> 4)] . $hexes [(ord($s{$i}) & 0xf)]);}
  return $r;
}

function hexToString ($h) {
  $r = "";
  for ($i= (substr($h, 0, 2)=="0x")?2:0; $i<strlen($h); $i+=2) {$r .= chr (base_convert (substr ($h, $i, 2), 16, 10));}
  return $r;
}

echo "<PRE>";
$key = "this is a 24 byte key !!";
$message = "This is a test message";
$ciphertext = des ($key, $message, 1, 0, null);
echo "DES Test Encrypted: " . stringToHex ($ciphertext);
$recovered_message = des ($key, $ciphertext, 0, 0, null);
echo "\n";
echo "DES Test Decrypted: " . $recovered_message;
?>

=====>

Bayron Landaverry
xBasePHP.com
(215)2226600 Philadelphia,PA, USA
MayaBuilders@gMail.com
Guatemala

FWH25.06--Harbour 3.0.0--BCC7.7--UEstudio 10.10
Windows 10

FiveWin, One line of code and it's done...

Posts: 476
Joined: Sat Feb 03, 2007 06:36 AM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Tue Jan 29, 2013 09:29 PM

Gracias Byron.
Voy a tomar en cuenta esta opción.

Saludos.

Carlos.

Posts: 476
Joined: Sat Feb 03, 2007 06:36 AM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Wed Jan 30, 2013 01:18 AM
Antonio,
Estoy intentando utilizar la clase Eagle1 de Manu, para conectarme a MySQL, y todo enlaza correctamente, pero cuando quiero conectarme a MySQL, no recibo ningún mensaje, y tampoco me presenta el dialogo a continuación, como se muestra en este código:

Code (fw): Select all Collapse
//---------------------------------------------------------------------------//
function AddDlg()

   local oDlg, oGet1, oGet2, oGet3
   local cTitle := Space( 80 ), cFamilien := Space( 80 ), cVorname := Space( 80 )
   Local oBase, oConn, oDb
 
   //----------------------------------------------------
    oConn := TMSConnect():New()
    IF !oConn:Connect( "127.0.0.1","root","rootpass",,3306)
       MsgInfo( "No se pudo conectar al MySQL" ) 
       Return NIL
    End

      oDb := TMSDataBase():New( oConn, "dbdatos" )
   
    if !oDb:Use()
       MsgInfo( "No se pudo conectar a la base de datos" ) 
        return nil
    endif

   //-----------------------------------------------------------
   
   DEFINE DIALOG oDlg TITLE "Prueba MySQL" SIZE 600, 400
   
   @ 12, 10 SAY "Title:" OF oDlg

   @ 10, 160 GET oGet1 VAR cTitle OF oDlg SIZE 300, 35

   @ 54, 10 SAY "FamilienName:" OF oDlg

   @ 52, 160 GET oGet2 VAR cFamilien OF oDlg SIZE 300, 35

   @ 94, 10 SAY "Vorname:" OF oDlg

   @ 90, 160 GET oGet3 VAR cVorname OF oDlg SIZE 300, 35

   @ 260, 160 BUTTON "Guardar" OF oDlg 

   @ 260, 300 BUTTON "Cancelar" OF oDlg

   ACTIVATE DIALOG oDlg NOWAIT
   
return nil


Si comento el código de conección a MySQL (entre puntos), el dialogo se presenta correctamente.

Podrías por favor, indicarme si es posible hacer esta conección a MySQL con Eagle1?

Saludos.

Carlos.
Posts: 44158
Joined: Thu Oct 06, 2005 05:47 PM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Wed Jan 30, 2013 08:57 AM
Carlos,

No crees ningun dialogo de momento. Solo ejecuta estas tres lineas:

Code (fw): Select all Collapse
IF !oConn:Connect( "127.0.0.1","root","rootpass",,3306)
       MsgInfo( "No se pudo conectar al MySQL" ) 
       Return NIL
    End


Y luego añades las siguientes:

Code (fw): Select all Collapse
 oDb := TMSDataBase():New( oConn, "dbdatos" )
   
    if !oDb:Use()
       MsgInfo( "No se pudo conectar a la base de datos" ) 
        return nil
    endif


para ver si se esta originando algun error ahi
regards, saludos

Antonio Linares
www.fivetechsoft.com
Posts: 476
Joined: Sat Feb 03, 2007 06:36 AM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Wed Jan 30, 2013 11:11 AM

Antonio,
Hice la prueba como me indicas, pero igual, no recibo ningún mensaje, solo se queda el cursor con la "ruedita" dando vueltas, como que estuviera procesando algo, pero igual no hace nada, y el menú funciona correctamente y puedo ingresar a otras opciones.

Saludos.

Carlos.

Posts: 44158
Joined: Thu Oct 06, 2005 05:47 PM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Wed Jan 30, 2013 02:45 PM

Carlos,

Comprueba si en el servidor se ha generado algún fichero log, en la carpeta cgi-bin

regards, saludos

Antonio Linares
www.fivetechsoft.com
Posts: 476
Joined: Sat Feb 03, 2007 06:36 AM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Wed Jan 30, 2013 07:33 PM
Antonio,
Ya habia visto este hb_out.log, con este mensaje:

Code (fw): Select all Collapse
Application Internal Error - C:\appserv\Apache2.2\cgi-bin\eagle.exe
Terminated at: 2013.01.28 17:06:23
Unrecoverable error 9015: Symbol item expected from hb_vmDo()
Called from MMINIT(0)
Called from TMSCONNECT:NEW(71) in source\MSConnect.prg
Called from MAIN(21) in eagle.prg


Pero eso era debido a que no tenia copiada la libMySQL.dll en el direcotorio cgi-bin.

Pero desde que copie esta dll en el directorio cgi-bin, ya no genera ningún archivo .log :-)

Saludos.

Carlos.
Posts: 44158
Joined: Thu Oct 06, 2005 05:47 PM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Wed Jan 30, 2013 08:10 PM

Carlos,

Es un servidor Windows ?

regards, saludos

Antonio Linares
www.fivetechsoft.com
Posts: 476
Joined: Sat Feb 03, 2007 06:36 AM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Wed Jan 30, 2013 10:18 PM

Si Antonio,
Estoy trabajando con un Apache instalado en un Windows 7 de 64Bits.

Saludos.

Carlos.

Posts: 44158
Joined: Thu Oct 06, 2005 05:47 PM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Fri Feb 01, 2013 08:11 AM

Carlos,

Y te funciona bien en local ?

regards, saludos

Antonio Linares
www.fivetechsoft.com
Posts: 476
Joined: Sat Feb 03, 2007 06:36 AM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Fri Feb 01, 2013 11:28 AM

Antonio,
Si te refieres a si Eagle1 me funciona correctamente con FWH con este servidor, la respuesta es si, puedo acceder a MySQL sin problemas.
Ahora, si la pregunta es si FiveWeb me funciona correctamente con este servidor, si funciona todo, menos el acceder a MySQL con Eagle1.

Lo que intento hacer es poder utilizar FiveWeb para conectar a MySQL, y quería utilizar lo que ya tengo desarrollado con la aplicación para el escritorio de Windows/Linux, solo que ahora quiero trasladarlo a Web, por medio de FiveWeb CGI.

Lo otro que se me ocurría, era utilizar PHP para hacer este comunicación con MySQL, pero creo que debería de poder utilizarse Eagle1, o tu me dices si no es posible.
También, estaba pensando, utilizar un servidor Linux y configurar el apache, para ver si con linux si funciona Eagle1, creo que haré las pruebas este fin de semana.

Gracias por tu ayuda.

Saludos.

Carlos.

Posts: 44158
Joined: Thu Oct 06, 2005 05:47 PM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Fri Feb 01, 2013 12:40 PM

Carlos,

Mi consejo es que probases con TDolphin por el simple motivo de que tenemos todo el codigo fuente disponible de él :-)

regards, saludos

Antonio Linares
www.fivetechsoft.com
Posts: 492
Joined: Wed Nov 16, 2005 12:03 PM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Mon Feb 04, 2013 04:58 AM

Antonio
Colegas
Estoy altamente necesitado de realizar consultas WEB con una base de datos MySQL. El servidor debera estar en nuestras instalaciones. Iniciare pruebas con esta herramienta-

Posts: 44158
Joined: Thu Oct 06, 2005 05:47 PM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Mon Feb 04, 2013 12:07 PM

Juan,

El ejemplo TestBrow.prg de FiveWeb muestra como construir un browse desde una tabla MySQL :-)

regards, saludos

Antonio Linares
www.fivetechsoft.com
Posts: 344
Joined: Sat Jul 22, 2006 09:04 PM
Re: FiveWeb de FiveTech (gratis hasta la versión 1.0)
Posted: Wed Feb 20, 2013 11:15 PM

Hola Antonio y comunidad Fivewinera, quiero empezar a probar fiveweb en el sevidor web que tengo contratado, les paso las caracteristicas del mismo:
Características principales:
■Basado en Virtual Private Server (VPS)
■Sistema Operativo CENTOS Linux
■IP propia
■Soporte JSP (Apache Tomcat)
■Acceso remoto a DB's MySQL
■Acceso root vía SSH
■512 MB Memoria Asignada
Quisiera generar los ejecutables y me indiquen el modo de hacerlo ya que he copiado los EXE a la carpeta indicada del servidor BIN-CGI y no los he podido hacer andar.
Quedo a la espera de alguna ayuda.
Saludos
Marcelo Roggeri
Talk: roggerimarcelo@gmail.com
skype: marcelo.roggeri

FWH - Harbour - BCC7 - PellesC